Published at Tuesday, March 26th, 2019 - 19:36:52 PM. wiring. By Fawnia Leroy.
Tele players often ask about adding series wiring to their instruments—a mod that lets you access a powerful tone when you engage both pickups. On a stock Tele, the pickups are connected in parallel when you use them together, but if you run them in series instead, the resulting output is hotter and louder, and this makes it much easier to drive your amp into saturation. If you’re craving burly Tele tones, series wiring will deliver. There are several ways to mod your Telecaster for series wiring. The most common approach is to replace the standard 3-way pickup selector with a 4-way switch. This keeps the three familiar switching positions untouched and simply adds a new sound in switching position #4. This is my preferred method, and I think it’s the most useful Telecaster mod ever.
The room thermostat senses room temperature and opens and closes a circuit as necessary. It is wired in series with the safety controls to control the flow of gas. Figure 10 shows our steam boiler with the thermostat and pressure control installed. There are many types of thermostats on the market today. All low-voltage thermostats have heat anticipators built in. This device allows the thermostat to allow for the heat generated by the wires in the thermostat. On a forced-air furnace, the flue damper, spill switch, and rollout switch will be the same as the steam boiler. The operating control is a combination fan and limit switch.
Any content, trademark’s, or other material that might be found on the Eventionline website that is not Eventionline’s property remains the copyright of its respective owner/s. In no way does Eventionline claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.